
DEVILLE bassman download page
"I
like the tone of a TWEED BASSMAN!"
THIS IS A NON-CHANNEL SWITCHING AMP REBUILD FOR YOUR FENDER blues
deville, hotrod deville, blues deluxe, or hotrod deluxe.
DOWNLOAD -
For:
 |
Blues
Deville |
 |
HotRod
Deville |
 |
Blues
Deluxe |
 |
Hotrod
Deluxe |
Any speaker setup (doesn't matter)
An all new Torres Designed complete point to point
super high performance rebuild of these amplifiers rebuilt to a Perfect
Vintage TWEED BASSMAN circuit PLUS, reverb and effects loop.
This is a complete Vintage amp with Reverb, high gain, plus clean
stage, Tube Buffered Effects loop treble, bass, midrange, a Torres Dual
Stage Master and Presence - all to give you that classic, easy to use
Tweed tone and, best of all Vintage Tweed Amp Performance
These rebuilt amps beat any real Vintage OR Boutique Tweed for tone,
tone, tone.
Features include:
All new Preamp and tone circuits with amazing Tweed amp clean tone
beyond compare, all rewired, point to point, all
new Tubular Polyester audiophile caps, all new power supply with much
lower noise and a huge bottom end boost from the special Torres "Cap
Pak" filter network.
Finally a TUBE DRIVEN TRANSFORMER reverb with the
Torres Design Reverb Transformer. It interfaces your existing Reverb
unit to the tube circuit.
Your amp is boosted up to 5 preamp tubes and can use ALL THE TUBES - 6L6's,
5881's, KT66, KT77, EL34, or 6CA7 tubes - the universal tube conversion
is done during the mod on ALL AMPS!.
TONS OF NEW technology, already tested and ready to
go.
Additional features:
Fully Boutique Amp hand-wired point to point on our
custom eyelet circuit board
Audiophile quality Orange Drop capacitors
New switchcraft jacks all around
All Mods Include all new Boutique quality tube sockets, all new pots
and the new preamp tubes needed for the project.We
have recommended Tube sets and speakers for even MORE Boutique amp
performance from your old Deville/Hotrod
Note:
Tweed amps and REAL MARSHALLS, AC30'S do not have reverb because they
can't - the basis of the circuit is the cathode follower tube stage
driving the tone circuit. This circuit is all important to the REAL
TONE of these amps.
This low impedence stage DOES NOT drive a reverb well at all -
generally it does not work. Manufacturers have to eliminate this VERY
IMPORTANT stage to add reverb to these amps - they DON'T SOUND RIGHT
Your Torres amp has the Torres Patented Reverb buffer
circuit designed into it.
An ultimately cool zero gain 100% all tube circuit that interfaces a
real tube reverb to the cathode follower output, plus provides the
(FREE)circuitry to install a buffered tube effects loop.
so you end up with a TRUE TWEED/MARSHALL/AC30 tone and amp circuit,
plus a real tube reverb and effects loop!! ultimate tube amp technology.
Your
download will appear as a DOWNLOAD button on the order confirmation
page.
You can also get to it, even from another computer from the ORDER
STATUS PAGE.
if you have trouble, please contact us with your order # and we will
send you a copy
|