The Cool Gibson Jimmy page wiring for Les Paul type guitars. Any guitar with 4 controls and two humbucking pickups. The same setup as the expensive Gibson Jimmy Page Guitar.

Everyone has been looking for this great setup for a long time.

This is the whole thing - 4 push pull pots on the four controls for your Les Paul, Epiphone or other Les Paul type guitar.

This amazing setup has all the sounds in the world!

This is a completely custom made item, made by hand in our shop. Please allow 4 to 6 weeks for delivery. We NEVER have them on hand. this is one of the most popular items in the world. If you are unable to wait, please do not order.

Pickups are NOT included. You need your own pair of 4 conductor pickups for this project.

Each volume becomes a push pull coil cut, coil/tap control for its pickup. These work all the time and switch the humbucker into single coil mode for a clean, crisp tone. Having one for each pickup allows the widest range of tones possible.

Another push pull pot is a phase switch, switching one pickup out of phase with the other. A funky, “trick” tone with a lot of uses for rhythm playing, funky leads, and a real cutting tone.

The last push pull pot places the two pickups in series. This is not found on ANY guitar (other then the Torres BluesTone) - this is a huge, big fat tone - both humbuckers become one giant humbucker for a monster tone.

AND the phase switch still works, so you can get series out of phase or in phase. Plus you can get series in phase, out of phase with single coils or humbuckers, mixed or whatever - you can see that there are hundreds of cool tones readily available from this amazing wiring setup.

You still have two volume controls and two tone controls. Both volumes are rewired as independent controls - they do not suffer from the “gibson disease” (when you turn one down the whole guitar used to go off - this is fixed).

Overall, the greatest wiring setup there is. Pickups have to be 4 conductor pickups to allow for the coil taps and other switching.

Available as an in-shop installation or a as a prewired kit. As a kit, we can do all the prewiring of the pots and controls but you will still have to install the pickups and their leads to the push pull pots. This is not real easy and does require good soldering skills and experience - there is no way around it as your pickups have to be installed in the guitar with wires through the body.

There are a lot of small wires to install into small tabs on the push pull pots - don't think you can "fake it" it requires very good skills to put together.

ILLUSTRATED MULTI-STEP INSTRUCTIONS ARE INCLUDED WITH THE KIT.

Note: Any wiring with a series switch requires user knowledge. In order for the pickups to be put in series one must be disconnected from ground and the other must be disconnected from the pickup selector toggle switch.

This requires user knowledge as when the pickups are in series the pickup selector does not work the same.

Gibson Les Pauls require long shaft pots - this is for guitars that are actually Gibsons, Epiphones are not the same and use standard pots.

This is a completely custom made item, made by hand in our shop. Please allow 4 to 6 weeks for delivery. We NEVER have them on hand. this is one of the most popular items in the world. If you are unable to wait, please do not order.

Works on any two pickup, 4 knob guitars from all these brands and many more: Fender, Gibson Les Paul, Ibanez, Epiphone, Peavey, Washburn, Samick, Johnson, Schecter, Jay Turser, Dearmond, Danelectro, Gibson SG, Gibson 335 series, Ibanez Artcore, Hamer, Silvertone, ESP



ON SALE! Jimmy Page Les Paul Wiring "Pagebucker"
pagebucker -select$295.95
your guitar: 
final notes on web page

Dan's Legendary Book "Inside Tube Amps" is now available on Amazon/Kindle

Copyright© Torres Engineering 2018. All rights reserved.

Shipping, Terms and Conditions. Privacy Policy.

Torres Engineering

Sandpiper Drive

Yuba City CA 95993

this is not a "walk in" shop

I am Partially retired due to illness, but getting better!

in business 48 years