 |  | 
  
matched preamp tubes
These tubes are EH 12AT7 dual
triodes where the A and B sides are closely matched for use in the
phase inverter or driver position of musical instrument amplifiers.
A single 12AX7/12AT7/12AY7/12AU7/5751 contains TWO circuits within the tube. These tubes are tested to find the INDIVIDUAL SINGLE TUBES in which these two circuits are MATCHED - 1 tube contains two circuits.
We found our suppliers could not provide us with enough high quality
Matched Preamp Tubes so we designed and built our ownTube Matching
machine
accurate to .00002A measurement - super accurate.
Now we can provide matched high quality preamp tubes all the time.
EACH INDIVIDUAL TUBE
IS HAND TESTED IN OUR TUBE MATCHING MACHINE. ONLY THE BEST &
MOST ACCURATE ARE SELECTED
AS "TORRES MATCHED TUBES" FOR USE IN OUR TUBE SETS.
The benefit of this tube in a guitar or bass amplifier is a matched
output section.
With a matched triode the upper and lower portions of the output
waveform will be much more equal.
When this waveform is not equal, differences are cancelled out in the
feedback loop of class A/B amplifiers and are noticed as a lack of
sustain or apparent "dead spots" in areas of the fret board.
At high levels at all frequencies, sustain will be improved.
This is even more critical in Class A amplifiers such as the Torres
Class A Models, Vox AC-30's, Matchless and other Class A amplifiers.
Improvements are heard in both Class A and Class AB amps.
Use the Matched tube in any application where a ECC81/12AT7 phase inverter/ driver is
used.
They are
a very noticeable improvement in tone in your amp!!
a Quick and Easy,
inexpensive HUGE tone improvement in any amp.
|
FREE
SHIPPING ON ANY ORDER OVER $60.00 - FREE! (in the U.S. only
NOTICE - THE ORANGE
DROP CAPACITORS USED IN OUR KITS HAVE BEEN 100% DISCONTINUED BY THE
MANFACTURER FOR EVER. THEY WILL NEVER BE MADE IN THE U.S. AGAIN
HIGH
QUALITY Mallory Tubular Capacitors will be included in your kit
we
apolgize for this, but no one anywhere was warned or informed in any
way prior to discontinuance.
We can install any and all of our
kits in our custom workshop - email for info.
|
|