 |  | 
  
Solid
1/4 in shaft. 3/8 in hole, threaded with nut.Full size pots, 1 inch
diameter, Nylon shaft.
These
were the standard for years in Fenders, Ampegs, Gibsons etc.
Can
be used in amps and guitars
Pre CBS Fender used them in both the amplifiers, and in the Telecaster
P-Bass and Jazz Bass
Note:
500k CTS are custom made at Torres Engineering
Note
#2: New 25K amp pots, also custom made at Torres Engineering. PUT THEM
IN YOUR FENDER'S MIDRANGE POT LOCATION FOR A FANTASTIC BOOST IN
MIDRANGE - ALMOST FREE!!!
New
- some fantastic finds in NOS (new old stock) CGE and CTS pots. the
200k pots are SOOOOO KOOL!! Incredible in a vintage strat for a "BIT
MORE" loading of the pickups, and they are the PERFECT volume pot for TORRES
BUZKUT PICKUPS.
AND, don't miss trying them in a Fender Reverb circuit - Kool!
ALSO
a fantastic supply of solid shaft (brass no less) 500k CTS
pots with a 40% tap included. - build that Brown Fender tapped treble
tone circuit with GOOD POTS now. Also use in Bauxandal tone circuits
(correct ones that is) a very cool part for a give-away price "Am7521 5k NEW Tweed
Bassman/Marshall Presence" "Am4683 10k standard Fender Midrange
control" "Am3443 25K CUSTOM Torres Midrange control" "Am7520 50kRA
Fender Vibrato intensity control" "Am4335 100k standard reverb pot"
"Am7739 200k CGE NOS A FIND! - reverb pot boost" "Am4837 250k treble
and bass" "Am1728 500k CUSTOM for tricks treble,bass,volume" "Am7740
500k CTS NOS with tap - tone contols!!"
"Am1485 1 meg Volume controls, bass in Marshall" "Am6855 3 meg Fender
vibrato speed"
|
FREE
SHIPPING ON ANY ORDER OVER $60.00 - FREE! (in the U.S. only
NOTICE - THE ORANGE
DROP CAPACITORS USED IN OUR KITS HAVE BEEN 100% DISCONTINUED BY THE
MANFACTURER FOR EVER. THEY WILL NEVER BE MADE IN THE U.S. AGAIN
HIGH
QUALITY Mallory Tubular Capacitors will be included in your kit
we
apolgize for this, but no one anywhere was warned or informed in any
way prior to discontinuance.
We can install any and all of our
kits in our custom workshop - email for info.
|
|