Click to enlarge super boogie mite
 DOWNLOAD The all new SUPER BOOGIE MITE kit for  the Fender Blues  Deville, Hotrod Deville, Blues Deluxe and Hotrod Deluxe  series of amps.

This is a MODIFICATION  to rebuild the amp,  remove the printed circuit board and replace with a new hand-wired point to point, MUCH SIMPLER, drastically better sounding,  high quality amp design.

Our boogie mite design has become incredibly popular - tone quality and usefulness is "off the chart" as a favorite for musicians everywhere.

Everyone has been asking for more versions of the  “Boogie Mite”  high gain amp with its incredible tonal range and lots of tonal options and variations.

This Download works on all these amps:





The New “ Super Boogie Mite” has a normal gain input with a classic “Fender-Like” full tone control set, Treble, Bass, midrange, volume, presence and Super Bass.

It also has an extra high gain jack with another stage of tube gain and it’s own gain control. This allows you to overdrive the preamp for the classic Boogie singing, creamy overdrive.

A new design Dual Stage master gives further control,  and a nice new high tech low noise performance mod to make an amp that you can not tell is on!!

The Super Boogie Mite has: 
gain boost on the high gain tube stage, 
bright switch,
gain boost switch,
midrange boost switch -
lots of tone modification capacity for a really versatile amp.

The Boogie Mite amps have become our most popular amp, with many owners saying it is the best sounding amp in the world.

The amp is converted to EL34 tubes  and has the new Torres Design  Presence and  SUPER BASS controls added.

The SUPER BASS is a great low end boost control unlike any other amp. it works  within the feedback circuit and gives the amp a huge bottom end bass response boost for amazing tone.

This is a fairly easy to build all-tube design without the channel switching or reverb - its appeal is the absolutely fantastic High Gain Boogie-like tone, plus the incredible natural, smooth clean tone and it is an ez kit to build in these popular amps.

the amp still uses its three 12AX7 preamp tubes, plus the two new EL34 power tubes.

Rectification is a Torres Custom dual GZ34 "Copper Cap"  for  rectifier tube sag and warm tone.

The mod uses the Torres Custom point-to-point Eyelet board, all the high quality orange drop capacitors, Carbon Composition resistors, new pots, switchcraft  jacks, ceramic tube sockets, new power supply filter caps.

The DOWNLOAD includes color illustrated instructional layouts, parts list, schematic  everything to do the modification to your existing Blues Deville, Blues Deluxe , Hotrod Deville, or Hotrod Deluxe Fender amp (any year).

in-shop installation is available also.

this is a medium level project requiring  experience soldering, assembling electronic parts  and some minor metal work (drilling holes, screws, nuts, bolts etc.)  You should be aware of what an amp looks like and you will assemble the parts to the circuit board
Our "Amp Basics" booklet is included with capacitor and resistor codes.

Your download will appear as a DOWNLOAD button on the order confirmation page.
You can also get to it, even from another computer from the ORDER STATUS PAGE.
if you have trouble, please contact us with your order # and we will send you a copy

DOWNLOAD the "SUPER BOOGIE" Mod for the Deville/hotrod/blues amp
DO7649 download$4.95
final notes on web page

Dan's Legendary Book "Inside Tube Amps" is now available on Amazon/Kindle

Copyright© Torres Engineering 2018. All rights reserved.

Shipping, Terms and Conditions. Privacy Policy.

Torres Engineering

Sandpiper Drive

Yuba City CA 95993

this is not a "walk in" shop

I am Partially retired due to illness, but getting better!

in business 48 years